I
NSTRUCTIONS
Step 1. Remove the four screws located underneath the
caboose.
Step 2. Lift the shell off the chassis. Unscrew the bulb from its
socket by turning it counter-clockwise.
Remove Screws
Step 3.
Re-assembly is the reverse procedure of removal. Be careful
when refitting the shell that you line up the ladders with the holes on
the outside of the railings and insert the ladders into these holes before
screwing the shell back to the chassis. Failure to line the ladders up
correctly may cause damage to the ladders or the railings.
Holes for
ladders to fit in.
Replacement bulbs (part no. CA-0230001) are available
directly from the MTH Parts Department
(Order online:
www.mth-railking.com, e-mail: parts@mth-railking.com,Fax:
410-423-0009, Phone: 410-381-2500, Mail: 7020 Columbia
Gateway Drive, Columbia MD 21046-1532, ).
Make sure ladder is
outside
the end railing.