Aux. ACG (Common)(Black)
Aux. AC Power In (Red)
Auxiliary power switch operation (to power switch from source other
than track power):
Figure 9:
Multiple switch operation through one Remote Switch (track power,
simultaneous opposite throws):
Figure 8:
Primary Switch
Secondary Switch
To Remote
Switch
To Remote
Switch
!
Connect Remote Switch as shown in Figure 2.
!
Connect the STRAIGHT AC screw terminal of the Primary Switch to the
CURVED AC screw terminal of the Secondary Switch.
!
Connect the CURVED AC screw terminal of the Primary Switch to the
STRAIGHT AC screw terminal of the Secondary Switch.
!
Connect the ACG (Common) screw terminal of the Primary Switch to the
ACG (Common) screw terminal of the Secondary Switch.
!
Remove Jumper between Track AC Out terminal and Aux. Power AC In
terminals (Save the jumper for future use).
!
Connect Remote Switch as shown in Figure 2.
!
Connect Auxiliary Power AC to Auxiliary Power AC In screw terminal
!
Connect Auxiliary Power ACG (Common) to ACG (Common) screw
terminal.
Auxiliary Powered Switch Operating Instructions
The RealTrax Switch can be powered from an auxiliary power source (either
another channel on your transformer or a separate transformer altogether).
Powering your Switch from auxiliary power will ensure that varying track
power does not affect the action of the switch. Also, if you operate at low
voltages or wish to operate many switches at once, auxiliary power operation
may be desirable.
10
Summary of Contents for RealTrax O-3
Page 5: ...5 1 2 3 4 5 Figure 1a ...