Auxiliary power operation of multiple switches through single Remote
Switch (simultaneous identical throws):
Figure 11:
Auxiliary power operation of multiple switches through separate Remote
Switches (separate throws):
Figure 10:
To Remote
Switch
To Remote
Switch
Aux. ACG (Common)(Black)
Aux. AC Power In (Red)
Primary Switch
Secondary Switch
To Remote
Switch
Aux. ACG (Common)(Black)
Aux. AC Power In (Red)
Primary Switch
Secondary Switch
!
Remove Jumpers from all auxiliary powered switches.
!
Connect Remote Switches as shown in Figure 2.
!
Connect Auxiliary Power ACG (Common) to all auxiliary powered
switch ACG screw terminals, either in series (from one Switch ACG
terminal to the next, as shown) or in parallel (each Switch ACG terminal
is wired directly to the auxiliary power source).
!
Connect Auxiliary Power AC to all auxiliary powered switch Aux. Power
In AC screw terminals, either in series (from one Switch AC terminal to
the next) or in parallel (each Switch AC terminal is wired directly to the
auxiliary power source).
!
Remove Jumpers from all auxiliary powered switches.
!
Connect Remote Switch to primary switch as shown in Figure 2.
!
Connect Auxiliary Power AC to Auxiliary Power AC In screw terminal of
primary switch.
!
Connect Auxiliary Power ACG (Common) to ACG (Common) screw
terminal of primary switch.
!
Connect the STRAIGHT AC screw terminal of the Primary Switch to the
STRAIGHT AC screw terminal of the Secondary Switch.
!
Connect the CURVED AC screw terminal of the Primary Switch to the
CURVED AC screw terminal of the Secondary Switch.
!
Connect the ACG (Common) screw terminal of the Primary Switch to
the ACG (Common) screw terminal of the Secondary Switch.
!
Connect Aux AC Power In screw terminal of the Primary Switch to the
Aux AC Power In screw terminal of the secondary switch.
11
Summary of Contents for RealTrax O-3
Page 5: ...5 1 2 3 4 5 Figure 1a ...
