MTI 840 Series, User Manual

MTI, Inc.

801-875-4999 • Fax 801-952-0548 • 

www.MTI.net

© MTI, Inc. All rights reserved. MTI reserves the right to make any product changes without  notice.

130-3280 Rev A

In-service Form for 840 Stretcher Bed  |

MTI

Strength in patient care.

™

Sales Order/Invoice No.:

 Customer Name:

Address:

Phone:

 Fax:

 Email:

Model Number

Description

Serial Number(s)

The following in-service has been performed on my MTI product(s):

In-service training, which meets MTI requirements for operation and use of above described equipment, has 

been provided by 

           .

Saved Programmable Home

Saved User Program Buttons (P1-P4)

Reviewed Safety Lockout

Reviewed ADA Compliant Home

Reviewed Controls and Operation sections of 

the User Manual

Customer Signature:

 Title:

Date:

Customer Name:

 Email:

I would like to be contacted to give a testimonial on my MTI products.

Save by positioning bed to desired location. If buttons are 

set to Momentary: press and hold the Home Button for 

10 seconds. If buttons are set to Maintain: Press the Stop 

button twice and then press and hold the Home Button for 

10 seconds. Once saved, audible and visual confirmation 

will be given.

ADA Compliant Home position is Lift Down, Tilt Down, Back 

Up, and Foot Down and Retracted. To access: if buttons are 

set to Momentary, press and release the Home Button twice 

(within 1 second). If buttons are set to Maintain, press and 

hold the Home Button twice (within 1 second).

Save by positioning bed to desired location, press and hold the 

desired program button for 5 seconds. Once saved, audible and 

visual confirmation will be given.

Locks out all commands once this state has been enabled. To 

enter, press the following sequence of buttons: Stop, Stop, 

Back Up, Stop. Once enabled, audible and visual confirmation 

will be given.

To exit, press the following sequence of buttons: Stop, 

Stop, Back Down, Stop. Once disabled, audible and visual 

confirmation will be given.

Once complete, email to in-service@mti.net

Set Smart Controller™ Settings

Enter the User Program Mode in the Smart 

Controller™ to change how the Program 

Buttons operate. See “Smart Controller™ 

Technology” page in the User Manual.

Maintain

Button Setting

Momentary

[Factory default]

 Momentary Program Buttons: press and release to automatically 

move bed to the programmed position.

Maintain Program Buttons: press and hold to move bed to the programmed 

position. Once button is released, bed will stop.

IN-SERVICE FORM

Reviewed Battery Use and Charging

2 Batteries are rotated between use. Charge depleted battery 

at the end of day. Insert the other battery at start of day. 

Remove battery from bed when not in use to increase use 

time. Review “Battery & Charger Operation” on page 20.

Review Mobile Base Operation

Identify the Mobile Base Option - Front Steer, Rear Steer, or 

Select Steer

Review Pedal Settings for Steering Mode, Free Mode, and Lock 

Mode.