AutoFry
OFS Operator’s Manual
11
OFS OM REV 02/19
63-0108
Filtering Oil in the AutoFry:
**FILTER OIL BELOW 300°F BUT ABOVE 200°F
**BE SURE TO ALWAYS WEAR PROTECTIVE GEAR**
1.
Make sure the OFS Vat is clean and empty to avoid overflow.
BE SURE THE AUTOFRY IS TURNED OFF UNTIL IT IS FILLED WITH OIL!
2.
Ensure the splash guards are inserted into the cutouts in the vat cover to avoid
leaking.
3.
Slowly open the drain valves and let the oil completely drain into the OFS Vat.
4.
Close the drain valves.
5.
Turn the main valve to
“Left Vat” or “Right Vat” (whichever you want filled first).
6.
Flip the ON / OFF switch to the left of the valve to the ON position to begin pumping.
7.
When the upper (hot) fill line is reached, flip the ON / OFF switch to the OFF position.
8.
Turn the valve to the opposite side vat.
9.
Flip the ON / OFF switch to the ON position to begin pumping.
10.
When the upper (hot) fill line is reached, flip the ON / OFF switch to the off position.
11.
Return the valve to the “OFF” position.
