AutoFry
OFS Operator’s Manual
12
OFS OM REV 02/19
63-0108
Disposal of Old Oil:
1.
Ensure the OFS Vat is completely empty to avoid overflow.
BE SURE THE AUTOFRY IS TURNED OFF UNTIL IT IS FILLED WITH OIL!
2.
Unplug the OFS from the machine outlet.
3.
Ensure the splash guards are inserted in the cutouts of the vat cover to avoid
leaking.
4.
Slowly open the drain valves and let the oil completely drain into the OFS Vat.
5.
Close the drain valves.
6.
Carefully lift the splash guards up and start to remove the OFS from underneath the
AutoFry.
7.
Disconnect the hose to the pump discharge fitting. This hose will remain attached to the
AutoFry.
8.
Completely remove the OFS and turn the pump ON /OFF switch to the OFF position.
9.
If the disposal requires transportation to a remote location, use extreme caution to
avoid spilling.
10.
Firmly connect the discharge wand to the pump discharge fitting.
11.
With the pump switch in the OFF position, plug the power cord into a 110AC Grounded
outlet.
12.
Hold the discharge wand into a suitable container with enough free space to hold the
volume of oil to be disposed of.
13.
Move the pump ON / OFF switch to the ON position and allow all of the oil to pump
from the oil tank.
14.
Flip the pump ON / OFF switch to the OFF position.
Figure 10