2
From an armed state, place the user key over the RFID
icon to disarm the system. LED will be flashing white.
1
CX FLEX
™ SINGLE-POWER
PRODUCT MANUAL
5
MTI P/N 063-00308 rev 2 ©2019 MTI All Rights Reserved
www.mtigs.com | T:800.426.6844
1
2
3
DELETING WHITELIST
(This will delete all User Keys from the system.)
ADDING NEW USER KEYS
Hold down the Authorization Card
for 5 seconds, LED will be solid
yellow.
Place Authorization Card over the RFID icon. Follow Key
Whitelist process starting on page 3.
From an Armed state, place the
User Key over the RFID icon to
disarm the system. LED will be
flashing white.
Place the Authorization Card over
the RFID icon AGAIN while LED is
yellow.
If successful
unit beeps 2 times
and the LED will turn solid green
If unsuccessful
unit beeps 4
times (retry)
