7
MTI P/N 063-00370 rev A ©2021 MTI All Rights Reserved
www.MTIGS.com | T:800.426.6844
FREEDOM FOCUS™ PRODUCT MANUAL
1
3
2
4
MERCHANDISING - SHELL 2
Plug in charge cable, routing the wire through the
channel to either side of puck. This will depend on
where the battery door is located on for your camera.
Insert battery eliminator into camera and close battery
door.
Remove the rubber cover from Shell 2.
Replace the rubber cover on Shell 2.
-CONTROLLED DOCUMENT-
063-00370
A-0
Status: Approved
