5
INM4500-2
Mar 2009
4.2.2 Tagging strip mounting kit (TSK08, TSK16, TSK24)
See Figures 4.1, 4.6.
Attach the tagging strip mounting posts (1) at backplane centres B (Figure 4.1) using two M3
x 12mm mounting screws (2) and washers (3) (Figure 4.9).
Attach colour coding labels (4) to the tag label (5) (Figure 4.10). See Table 4.2 for suggested
colour codes for individual modules.
Mark the tag label (5) with the tag reference.
Slide the tag label (5) into the plastic holder (6) and retain with a plastic rivet (9) (Figure 4.6).
Attach the plastic retaining tie (7) with two plastic rivets (8) (Figure 4.6).
Clip the tag strip holder (6) onto the mounting posts (1) by pushing it downwards (Figure
4.7).
If required, swivel the tagging strip vertically (Figure 4.7)
a)
b)
c)
d)
e)
f)
g)
Colour
Module no.
Function
White
MTL451x
Digital Inputs
Red
MTL452x
Digital Outputs
Blue
MTL4541
MTL4544
Analogue Inputs
Green
MTL4546
MTL4549
Analogue Outputs
Orange
MTL4575
Temperature inputs
Grey
MTL4599
Dummy isolator
Table 4.2: MTL4500 front label colour coding
TSK08
TSK08
ERK08
ERK08
BACKPLANE
IDENT
MODULE
IDENT
Figure 4.5: Locations for lables and attachments
1
2
3
9
5
7
8
6
4
Figure 4.6:
Mounting a
tagging-strip
post
(6)
8
8
1
tie (7)
Figure 4.7:
Attaching and
swivelling a
tagging-strip
