follow all instructions and also protect
other workers from the same danger.
Will result in
Death or Serious Injury.
Could result in
Death or Serious Injury.
Could result in
Minor or Serious Injury.
Not related to
Personal Injury.
Operator Safety
Training Tips
It is the responsibility of the operator
using this attachment to be acquainted
with the safe operation. In addition to
reading this manual, it is important that
the operator read the skid steer’s
operation manual and follow its
manufacturer’s recommendations!
Before lifting or lowering the
cutter, make sure the area is clear of
bystanders or objects.
Machinery parts sometimes have
sharp edges. Wear work gloves when
moving parts. Always use caution
around cutter blades as they often are
very sharp.
Never use drugs or alcoholic
drinks when operating or servicing this
piece of equipment.
Always wear the proper personal
protection equipment when servicing or
operating this piece of equipment. Never
service or operate this
attachment with bare feet, sandals, or
other light footwear.
MTL Attachments
PAGE 4
Always use eye protection during
operation. Mount this attachment on a
skid steer equipped with thermoplastic
polycarbonate door panel and side
panels.
Speed Kills! Operate this
implement at a safe working speed.
When transporting the implement,
keep a safe speed to avoid losing
control of the attachment or prime
mover.
Keep proper clearance between
the implement and objects (utilities,
tree stumps, large rocks, buildings,
etc.). Contacting these objects with the
implement or prime mover could cause
a loss of control or damage to the
implement or property.
Before each operation of this
implement, check all hardware (bolts,
nuts, pins, etc.) for their proper
location and tightness.
Stop the engine on the skid steer
and set the brake to avoid the
implement rolling forward or
backwards while you are exiting the
prime mover.
Store this implement in an area
not frequented by children.
Allow no riders on this
attachment. Keep all bystanders clear
of attachment during operation.
Always replace worn, torn or
missing safety decals before operating.
Never operate the cutter when
bystanders are within 75 feet (23 m) of
the work area.
X-treme Brush Cutters
January 2016
