Meter’s Specifications
Clamp size :
opening 1.2" (30mm) approx.
Diode test :
test current of 0.3mA typical ; open circuit voltage
1.5V DC typical
Continuity check:
treshold <150Ω; test current <0.5mA
Low battery indication:
+
is displayed
Over range indication:
"OL"
is displayed
Measurement rate:
2 per second, nominal
Input impedance :
10MΩ (VDC and VAC)
Display :
4000 counts LCD
AC current :
50-60Hz (AAC)
AC Voltage bandwidth :
50-400Hz (VAC)
Operating temperature:
41 to 104ºF (5 to 40ºC)
Storage temperature :
-4 to 140ºF (-20 to 60ºC)
Operating humidity :
max of 80%, up to 87ºF (31ºC) decreasing linearly to
50% at 104ºF (40ºC)
Storage humidity :
<80%
Operating altitude :
7000 feet (2000 meters) maximum
Overvoltage :
category III 600V
Battery :
two "AAA" 1.5V batteries
Auto OFF:
after approx. 30 minutes
Dimensions/weight :
200x66x37mm / 205g
Accessories:
test leads, carrying case, alligator clips, temperature probe, 2
ʺAAAʺ 1.5V batteries, instruction manual
Safety :
For indoor use and in accordance with Overvoltage
Category II, Pollution Degree 2. Category II includes local
level, appliances, portable equipment, etc., with transient
overvoltage less than overvoltage Cat. III
5
www.dmm.ca
1-866-960-9400
PRECISION IS OUR VISION
Digital Measurement Metrology, Inc
TM
Digital Measurement Metrology, Inc
