Meter’s Specifications
Clamp size :
opening 1.2" (30mm) approx.
Diode test :
test current of 0.3mA typical ; open circuit voltage
1.5V DC typical
Continuity check:
treshold <150Ω ; test current <0.5mA
Low battery indication:
+
is displayed
Over range indication:
"OL"
is displayed
Measurement rate:
2 readings per second, nominal
Input impedance :
10MΩ (VDC and VAC)
Display :
4000 counts LCD
AC current :
50-60Hz (AAC)
AC Voltage bandwidth :
50-400Hz (VAC)
Operating temperature:
41 to 104ºF (5 to 40ºC)
Storage temperature :
-4 to 140ºF (-20 to 60ºC)
Operating humidity :
max of 80%, up to 87ºF (31ºC) decreasing linearly to
50% at 104ºF (40ºC)
Storage humidity :
<80%
Operating altitude :
7000 feet (2000 meters) maximum
Overvoltage :
category III 600V
Battery :
two "AAA" 1.5V batteries
Auto OFF:
after approx. 30 minutes
Dimensions/weight :
200x66x37mm / 205g
Accessories:
test leads, carrying case, alligator clips, temperature probe, 2
ʺAAAʺ 1.5V batteries, instruction manual
Safety :
for indoor use and in accordance with Overvoltage Category
II, Pollution Degree 2. Category II includes local level,
appliances, portable equipment, etc., with transient
overvoltages less than Over voltage Cat. III
5
