Model Number
393B04
SEISMIC ICP® ACCELEROMETER
Revision: G
ECN #: 47130
Performance
ENGLISH
SI
Sensitivity(± 10 %)
1000 mV/g
102 mV/(m/s²)
Measurement Range
± 5 g pk
± 49 m/s² pk
Frequency Range(± 5 %)
0.06 to 450 Hz
0.06 to 450 Hz
Frequency Range
(± 10 %)
0.05 to 750 Hz
0.05 to 750 Hz
Frequency Range
(± 3 dB)
0.02 to 1700 Hz
0.02 to 1700 Hz
Resonant Frequency
≥
2.5 kHz
≥
2.5 kHz
Broadband Resolution(1 to 10,000 Hz)
0.000003 g rms
0.00003 m/s² rms
[1]
Non-Linearity
≤
1 %
≤
1 %
[2]
Transverse Sensitivity
≤
5 %
≤
5 %
[3]
Environmental
Overload Limit(Shock)
± 300 g pk
± 2950 m/s² pk
Temperature Range
-15 to +176 °F
-26 to +80 °C
Temperature Response
See Graph
See Graph
Base Strain Sensitivity
≤
0.0005 g/µ
ε
≤
0.005 (m/s²)/µ
ε
[1]
Electrical
Excitation Voltage
18 to 30 VDC
18 to 30 VDC
Constant Current Excitation
2 to 10 mA
2 to 10 mA
Output Impedance
<500 Ohm
<500 Ohm
Output Bias Voltage
7 to 12 VDC
7 to 12 VDC
Discharge Time Constant
5 to 15 sec
5 to 15 sec
Settling Time
<100 sec
<100 sec
Spectral Noise(1 Hz)
0.30 µg/
√
Hz
2.9 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(10 Hz)
0.10 µg/
√
Hz
1.0 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(100 Hz)
0.04 µg/
√
Hz
0.4 (µm/sec
2
)/
√
Hz
[1]
Spectral Noise
(1 kHz)
0.04 µg/
√
Hz
0.4 (µm/sec
2
)/
√
Hz
[1]
Physical
Sensing Element
Ceramic
Ceramic
Sensing Geometry
Flexural
Flexural
Housing Material
Titanium
Titanium
Sealing
Hermetic
Hermetic
Size (Diameter x Height)
0.99 in x 1.22 in
25 mm x 31 mm
Weight
1.8 oz
50 gm
[1]
Electrical Connector
10-32 Coaxial Jack
10-32 Coaxial Jack
Electrical Connection Position
Top
Top
Mounting Thread
10-32 Female
10-32 Female
[4]
All specifications are at room temperature unless otherwise specified.
In the interest of constant product improvement, we reserve the right to change specifications without notice.
ICP
®
is a registered trademark of PCB Group, Inc.
OPTIONAL VERSIONS
Optional versions have identical specifications and accessories as listed for the standard model
except where noted below. More than one option may be used.
T
- TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
TLA
- TEDS LMS International - Free Format
TLB
- TEDS LMS International - Automotive Format
TLC
- TEDS LMS International - Aeronautical Format
TLD
- TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
Excitation Voltage
20 to 30 VDC
20 to 30 VDC
Output Bias Voltage
7.5 to 13 VDC
7.5 to 13 VDC
W
- Water Resistant Cable
Electrical Connection Position
Top
Top
Electrical Connector
Sealed Integral Cable
Sealed Integral Cable
NOTES:
[1] Typical.
[2] Zero-based, least-squares, straight line method.
[3] Transverse sensitivity is typically
≤
3%.
[4] See PCB Declaration of Conformance PS023 for details.
SUPPLIED ACCESSORIES:
Model 081B05 Mounting Stud (10-32 to 10-32) (1)
Model 085A41 Thermal Boot (1)
Model ACS-1 NIST traceable frequency response (10 Hz to upper 5% point). (1)
Model ACS-4 Single axis, low frequency phase and amplitude response cal from 0.5 to 10 Hz
(1)
Model M081B05 Mounting Stud 10-32 to M6 X 0.75 (1)
Entered: LK
Engineer: BAM
Sales: WDC
Approved: BAM
Spec Number:
Date: 8/14/2017
Date: 8/14/2017
Date: 8/14/2017
Date: 8/14/2017
17026
3425 Walden Avenue, Depew, NY 14043
Phone: 716-684-0001
Fax: 716-684-0987
E-Mail: info@pcb.com
Summary of Contents for PCB Piezotronics 394C06
Page 16: ......
