SAFETYSURE
®
THE KNEE SLING™
Installation Instructions
To Order Call: 1.800.854.4687
34 Sullivan Road, Unit 32 - North Billerica, MA 01862
The Knee Sling can be attached to the right or the left side of your walker depending on your needs. The Knee Sling
is easy to install. Simply follow the steps below.
Step 1:
Adjust your walker so
that when standing with
your arms at your side,
the walker hand grips
are at wrist level
Step 3:
Adjust The Knee Sling
height using the straps
around the walker han-
dles so that The Knee
Sling is at or slightly
above your knee.
Step 2:
Hold The Knee Sling
with the padding side
facing up and the stabi-
lizer straps facing the
side of the walker you
wish to use The Knee
Sling on. Place a han-
dle strap over the hand
grip of your walker, and
attach to the corre-
sponding buckle on the
sling. Repeat process
with the other handle
strap on the other side
on the walker.
Step 5:
Tighten all straps and check buckles of The Knee Sling
before using your walker. Periodically recheck to make
sure that straps remain tight.
Stabilizer Straps
Step 4:
Wrap the
stabilizer
strap 360 degrees
around the front and
rear legs of your walker
as shown in figure (A).
It is critical that the sta-
bilizer strap is wrapped
completely around the
legs of your walker be-
fore connecting the
strap using the plastic
buckle, see figure (B).
Tighten Stabilizer Strap
to stabilize The Knee
Sling.
(A)
(B)
Handle Straps
