- 39 -
4.2 Camera Control Mode
The TFIR-31LAN series image reader can store multiple settings in TABLE. The
TABLE consists of 9 tables (#0 to #8). In “AGC=D” (Fixed Gain Mode) and
“AGC=E” (Automatic Gain Control Mode), the reader uses Table #0. In “AGC=T”
(Table Mode), the reader uses Table #1 to #“n”. The “n” can be configured by
ENABLEDDMTBL=n command.
■
Fixed Gain Mode
[AGC=D]
In Fixed Gain Mode, the reader uses only Table #0 settings. The settings in
Table #0 will not be changed automatically.
■
Automatic Gain control mode
[AGC=E]
In Automatic Gain Control Mode, the reader uses only Table #0 settings and
gain value in Table #0 will be changed automatically through instructions
from decoder. This mode is useful especially for symbols printed on paper.
This mode is effective in Reading Timeout Mode or External Trigger Mode.
Fixed gain: D
Table #0
Table #1
Table #2
Table #3
Table #4
Table #5
Table #6
Table #7
Table #8
Automatic gain: E
Table: T
Camera Control Mode
TABLE
Summary of Contents for TFIR-31LAN series
