- 41 -
4.3 Detail of Table Mode
Up to 8 tables can be used while the trigger is activated.
ENABLEDDMTBL=a (a: 1 to 8)
e.g.1) Use 3 tables (a=3)
Table #1, #2 and #3 are enabled and Table #4 through #8 will not be used. If
the reader successfully decodes a symbol with Table #1, Table #1 will be used
in the next reading.
If the reader failed to decode a symbol with Table #1, the settings will switch to
Table #2, etc.
If the reader failed to decode with Table #3, the settings will switch back to
Table #1.
e.g.2) Use 1 table (a=1)
Only Table #1 is enabled. Table #2 through #8 will not be used. As the result,
Table #1 is always used every reading.
The
following shows the structure of the Table. Each table has 9 types of
parameters:
(1)
Decode
area
[DDMwindow]
(2) Illumination control
[DDMlight]
(3) Internal illumination
[DDMled]
(4) Illumination intensity
[DDMbrightness]
(5) Shutter speed
[DDMshutt]
(6) Extra gain value
[DDMexgain]
(7) Black level adjustment
[DDMblack]
(8) Image preprocessing
[DDMpreproc]
(9) Mirrored symbol
[DDMmirror]
Table
#0 (1) (2) (3) (4) (5) (6) (7) (8) (9)
Table
#1 (1) (2) (3) (4) (5) (6) (7) (8) (9)
Table
#2 (1) (2) (3) (4) (5) (6) (7) (8) (9)
Table
#3 (1) (2) (3) (4) (5) (6) (7) (8) (9)
Table
#4 (1) (2) (3) (4) (5) (6) (7) (8) (9)
Table
#5 (1) (2) (3) (4) (5) (6) (7) (8) (9)
Table
#6 (1) (2) (3) (4) (5) (6) (7) (8) (9)
Table
#7 (1) (2) (3) (4) (5) (6) (7) (8) (9)
Table
#8 (1) (2) (3) (4) (5) (6) (7) (8) (9)
Summary of Contents for TFIR-31LAN series
