- 63 -
6.2.2 Configure through LAN interface
Configure settings through LAN interface, if the IP address and the port number
of the reader are known. Make sure the IP address of the host computer is set
into the same network as the reader.
- Configuration procedure is same as RS232C.
6.3 Default
settings
IP address
: 192.168.209.xxx
Sub net mask
: /24 (same as 255.255.255.0)
Port number
: 27110
Default Gateway address
: 192.168.209.254
Note: Default IP address is configured from the MAC address. “xxx” is decimal
number that is converted from the HEX number (The last 2 digits of the MAC
address).
e.g.)
00-16-FC-02-00-0A
→
xxx=10 (192.168.209.10)
00-16-FC-02-00-10
→
xxx=16 (192.168.209.16)
Summary of Contents for TFIR-31LAN series
