- 67 -
possible:
- Get a list of all TFIR-31LAN units on the local network.
- Get unknown IP address, TCP/IP port number of connected devices.
By using UDP/IP connections, a host can disconnect TCP/IP connections
forcibly.
6.7 Serial command for LAN settings
?LAN
Get a list of settings for LAN connection
IPADR=<IP address in dotted notation>/<Bit number of subnet mask>
Set IP address and subnet mask of the reader.
GWADR=<IP address in dotted notation>
Set default gateway address of the reader.
IPPORT=<TCP/IP port number> (decimal)
Set TCP/IP port number of the reader.
TCPCS=a (a=0; Disable a=1; Enable)
Set the function of data arrival confirmation. If enabled, the reader will wait to send
the next data until receiving “Ack”, which is associated with the previous data, from
the host.
?who
Get the following status:
•
Local IP address (IP address of the reader)
•
Local Port number (TCP server port number of the reader)
•
Subnet
mask
•
Gateway
IP
address
•
MAC address (last 3 digits only)
?netstat
Get the following status in a line:
•
Local IP address (IP address of the reader)
Summary of Contents for TFIR-31LAN series
