5.
Tighten locknut (1) to specified torque using a torque wrench, holding adjusting screw (2) firm with Allen
key (5 mm).
Name
Size
Type
Lubricant
Value/Standard
Nut
M10x1
Tightening torque
43+4 Nm
6.
Check valve clearance, readjust as necessary.
Final steps
1.
Remove barring tool (→ Page 96).
2.
Install cylinder head cover (→ Page 101).
3.
Enable engine start.
100 | Task Description | MS150100/04E 2015-09
TIM-ID: 0000054769 - 003