11.
Screw in drain plug (3) and tighten to specified torque using a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Drain screw
A/F10
Tightening torque
(Engine oil)
6.5±1.3 Nm
12.
Vent fuel system (→ Page 103).
Variant B – Replacing fuel filter
without cooler
1.
Provide a suitable container in which to col-
lect the fuel.
Note:
Do not completely remove drain plug.
2.
Unscrew drain plug (3) at the bottom.
3.
Continue with steps (→ Step 3) to
(→ Step 12).
MS150100/04E 2015-09
| Task Description | 107
TIM-ID: 0000028014 - 004