3.
Unscrew the screw caps (1) of the filters ap-
prox. 3 to 4 revolutions.
4.
Wait 10 minutes until the oil has drained from
the filter housings.
5.
Remove screw cap (1) with oil filter ele-
ment (3) and remove oil filter element (3) by
pressing on the bottom edge from the side.
6.
Check condition of sealing ring (2) on screw
cap.
7.
Replace sealing ring (2) if damaged.
8.
Coat sealing ring (2) with oil.
9.
Insert new oil filter element (3) in screw
cap (1) and press in until it locks in place.
10.
Screw on screw cap (1) with oil filter element (3) and tighten to the specified torque with a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Screw cap
Tightening torque
(Engine oil)
35±3.5 Nm
11.
Replace other engine oil filters in the same way.
12.
Fit cover and tighten screws.
13.
Check oil level (→ Page 112).
MS150100/04E 2015-09
| Task Description | 115
TIM-ID: 0000028018 - 002