2 Transport
2.1 Transportation
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Crossbeam
T80092479
1
DANGER
Suspended load.
Danger to life!
• Use appropriate lifting devices and appliances.
• Never stand beneath a suspended load.
Transportation
1.
Install the locking screws for the engine mounts prior to engine transportation.
2.
Transport the engine by the lifting eyes provided (→ Page 16).
3.
Use suitable transport and lifting gear only.
4.
Transport the engine in the installation position only: max. admissible diagonal pull 10° (→ Page 16).
5.
Remove any loose parts on the engine.
6.
Raise and lower the engine slowly. Lifting cables/chains must not touch the engine or any of its component
parts when lifting. Readjust lifting gear as necessary.
7.
For special packaging with aluminum foil: Suspend the engine by the lifting eyes on the bearing pedestal or
transport by means of handling equipment (forklift truck) capable of bearing the load.
8.
Secure the engine against tilting during transportation. Secure such as to preclude slipping and tipping when
driving up or down inclines and ramps.
Placement after transport
1.
Set the system down on a firm, flat surface only.
2.
Make sure that the consistency and load-bearing capacity of the ground or support surface is adequate.
3.
Never set the engine down on its oil pan unless expressly authorized to do so by MTU.
MS150100/04E 2015-09
| Transport | 15
TIM-ID: 0000064651 - 001