587 – AL Wiring PWM_CM4
Cause
Corrective action
The exhaust brake on the B-side
Y57B / MB57B cannot be
activated.
u
Contact Service.
597 – AL Wiring PWM_CM5
Cause
Corrective action
The exhaust brake on the A side
Y57A / MB57A cannot be
activated.
u
Contact Service.
602 – AL CAN Engine Start Lock
Cause
Corrective action
The ECU has received a start
interlock from the plant via the
CAN bus.
1. Check plant control system.
2. Contact Service.
608 – AL Wiring PWM_CM6
Cause
Corrective action
Disruption or short-circuit in
wiring to servomotor of bypass
flap (B side) M52.2.
1. Check engine wiring (→ Page 135).
2. Contact Service.
609 – AL Wiring PWM_CM7
Cause
Corrective action
Wire break or short circuit in
power supply of TriCAN sensor
(B90), or NOx sensor (B88.1/
B88.2) or oil level sensor J1939
(B93).
1. Check engine wiring (→ Page 135).
2. Contact Service.
615 – AL EIL Protection
Cause
Corrective action
The engine number in the EIL
does not match the engine
number stored in the ECU.
1. Check engine wiring (→ Page 135).
2. Contact Service.
616 – AL EIL Error
Cause
Corrective action
The ECU does not recognize the
EIL.
u
Contact Service.
MS150100/04E 2015-09
| Troubleshooting | 81
TIM-ID: 0000064702 - 001