Fault type – fault message text
SE no.
Error message text
0
Sensor Temperatur Defect
1
Temperature failure
2
Sensor Voltage Defect
3
Voltage failure
4
CAN Bus- 1 Error/Bus Defec
5
CAN Bus- 1 Overrun
6
CAN Bus- 2 Error/Bus Defec
7
CAN Bus- 2 Overrun
8
Temperatur Compensation Error
9
I/O-Module Slot2 Defect
10
I/O-Module Slot3 Defect
11
I/O-Module Slot4 Defect
12
Serial Conection Lost
13
CAN Bus- 3 Error/Bus Defec
14
CAN Bus- 3 Overrun
15
S/A Bus Faulty
16
PAN 1 Defect
17
PAN 2 Defect
18
PAN 3 Defect
19
PAN 4 Defect
20
PAN 5 Defect
21
PAN 6 Defect
22
I/O-Module Slot1 Defect
23
I/O-Module Slot5 Defect
24
I/O-Module Slot6 Defect
25
I/O-Module Slot7 Defect
26
I/O-Module Slot8 Defect
27
Download Server Collision
28
not projected node
Engine governor messages
Recommended action in case of alarm
Yellow alarm:
The engine can still be operated providing that automatic engine shutdown to protect the engine has
not been configured or is not tripped. Contact Service immediately/start fault rectification.
Red alarm:
Caution, the engine is running at its limits. Shut down manually without further delay if the engine does
not shut itself down immediately after a red alarm is signaled.
Fault and alarm messages
The fault code numbers are generated by the engine governor and transmitted to the display below.
MS15018/02E 2013-09
| Troubleshooting | 41
TIM-ID: 0000008508 - 003
