2 Transport
2.1 Transportation
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Crossbeam
T80091826
1
Crossbeam
T80092360
1
DANGER
Suspended load.
Danger to life!
• Use appropriate lifting devices and appliances.
• Never stand beneath a suspended load.
Transportation
1.
Install the engine mounting locking devices and the engine transportation lock prior to transportation
(→ Page 18).
2.
Use the lifting eyes provided to transport the engine/generator (→ Page 17).
3.
Use suitable transport and lifting gear only.
4.
The engine/generator must only be transported in installation position: max. admissible diagonal pull 10°
(→ Page 17).
5.
Remove any loose parts on the engine/generator.
6.
Raise and lower the engine/generator slowly. Do not allow hoist slings or chains to contact the engine/
generator or any of their component parts. Adjust lifting gear as necessary.
7.
For special packaging with aluminum foil: Suspend the engine by the lifting eyes on the bearing pedestal or
transport by means of handling equipment (forklift truck) capable of bearing the load.
8.
Secure the engine/generator such as to preclude tipping during transport. Secure such as to preclude slip-
ping and tipping when driving up or down inclines and ramps.
Setting down after transport
1.
Set the system down on a firm, flat surface only.
2.
Make sure that the consistency and load-bearing capacity of the ground or support surface is adequate.
3.
Never set the engine down on its oil pan unless expressly authorized to do so by MTU.
16 | Transport | M015565/03E 2016-02
TIM-ID: 0000065840 - 002
