7.7 Oil Filtration / Cooling
7.7.1 Engine oil filter – Replacement
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Torque wrench, 10-60 Nm
F30510423
1
Ratchet adapter
F30027340
1
Socket, 32 mm
F30006120
1
Engine oil
Oil filter element
(→ Spare Parts Catalog)
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Engine oil filter – Replacement
1.
Unscrew the oil filter covers (1) approx. 3 to
4 revolutions.
2.
Wait 10 minutes until the oil has drained
from the filter housings.
3.
Remove cover (1) with oil filter element (3)
and remove oil filter element (3) by pressing
on the bottom edge from the side.
4.
Check condition of sealing ring (2) on cov‐
er.
5.
Replace sealing ring (2) if damaged.
6.
Coat sealing ring (2) with oil.
7.
Insert new oil filter element (3) in cover (1)
and press in until it locks in place.
8.
Screw on cover (1) with oil filter element (3) and tighten to the specified torque with a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Cover
Tightening torque
(Engine oil)
35 Nm ±3.5 Nm
9.
Replace other engine oil filters in the same way.
10.
Check oil level (→ Page 46)
48 | Task Description | MS15025/00E 2011-12
TIM-ID: 0000035560 - 001
