Section E Ganging up Belarus – 90/92 Operating Manual
48
Outside chain ties (2)
Partial interlocking
Provide horizontal machine displacement
in operational position by coupling limiting
chains to lower holes of brackets (1) and
adjusting the length of chains by means of
ties (2) to obtain an implement sway to
each side at least 125 mm, or in
accordance with machine operating
instructions.
When operating with ploughs set length of
the right-hand brace to depth of tillage
ATTENTION! Be sure to maintain
degree of machine swaying at least at
the range of 125 mm in order to avoid
chains breaking when lifting the machine
into transport position.
When setting machine into transport
position tighten chains by means of ties
(2). Machine can sway to both sides 20
mm maximum.
Full interlocking
To fully interlock the machine in
operational position connect limiting
chains (2) to the second lowest hole of
the bracket (1) and shorten length of
chains (2) to minimum.
In transport position the interlocking is
performed automatically.
https://tractormanualz.com/
