Section G. Maintenance
Belarus – 90/92 Operating manual
93
Operation 28. Rinse oil drain filter of
steering booster.
For rinse of oil filter do the following:
а
) remove facing;
b)
loose oil pipes 7, 13
и
15,
unscrew bolts 5 from the cover 6
fastener group to the casing, using two
extracting bolts take off the cover;
c)
screw out reducing valve 11 and
take off drain filter 9;
d)
Rinse filter in wash liquid;
e)
Tighten up nut 8 of the turning
shaft;
f)
Put filter in place and make
assembly of the filter in the reverse
order;
g)
simultaneously adjust axial play
of the steering shaft, for this purpose do
the following:
loosen locknut 1 and screw down
adjusting bolt 2 up to the stop into the
shaft end, then unscrew by 1/8-1/10
turns and locknut with safety nut 1.
Operation 29. Lubricating of front
axle stubs (Belarus 90)
Using grease gun make 10…12
injections of lubrication grease via
compression cups (one cup for each
stub). Grease is “LITOL-24”.
https://tractormanualz.com/
