miniPCIe-CEFIRO Family
www.mtxm2m.com
www.matrix.es
2017/05 v1.2
Page 15
/
61
MTX Terminals® by MATRIX ELECTRONICA S.L.U
Enhanced Rate: 2, 3Mbps
High Speed: 6, 9 , 12, 18, 24, 36, 48, 54Mbps
Modulation Method: 8DPSK, π/4 DQPSK, GFSK
Operating Channel: 2.4GHz: Ch. 0 to 78
Frequency range: 2.4GHz ISM (2.400GHz to 2.4835GHz)
Spread Spectrum: FHSS (Frequency Hopping Spread Spectrum)
Output power: max + 10dBm
Receiver sensitivity: -90dBm
Network architecture: Pico Net, Scatter Net
Security: simple pairing
GPS
Protocol
NMEA
Modes
Standalone GPS
Assisted GPS
Control plane – E911
User plane
General
Automatic power saving modes
Power supply for active antenna
Software
AT commands
Hayes, 3GPP TS 27.007, 27.005, Gemalto M2M
AT commands for RIL compatibility
Java
TM
Open
Platform
Java
TM
Open Platform with
Java
TM
profile IMP-NG & CLDC 1.1 HI
Secure data transmission via HTTPS/SSL
Multi-threading programming and multi-application execution
Major benefits: seamless integration into Java applications, ease of programming, no need for
application microcontroller, extremely cost-efficient hardware and software design – an ideal
platform for industrial GSM applications.
The memory space available for Java programs is around 8MB in the flash file system and around 6MB
of RAM. Application code and data share the space in the flash file system and in the RAM.
Microsoft
TM
compatibility
RIL for Pocket PC and Smartphone
SIM Application
Toolkit
SAT Release 99
Firmware update Firmware update from host application over USB.
Interfaces (depending on model)
USB
Supports a USB 2.0 High Speed (480Mbit/s) device interface, Full Speed (12Mbit/s) compliant
UICC interface
Supported chip cards: UICC/SIM/USIM 3V, 1.8V
Antenna
50 Ohms. GSM/UMTS main antenna, GPS and WiFi/BT secondary antennae
Status LED
4x LED to indicate device and connectivity status and 3x LED for manufacturing test.
Reset signals
2x signal for resetting the device
Status signals
PCIe standard status
Power on/off, Reset
Power on/off
Automatic switch-on at power supply
Switch off by AT command
