33
MTX-Gateway | 2019/4
MTX © by MATRIX ELECTRONICA S.L.U.
SUPPORT:
iotsupport@mtxm2m.com |
SALES:
info@mtxm2m.com |
mtxm2m.com
3.2 DIP Switches
The MTX-Gateway has two Dip-Switches for configuration purposes. The following tables show information
about the signals connected to each Dip Switch.
SW1:
PIN
SIGNAL
REMARK
8
LCD_D04
Booting Configuration Signals
Check TQMa28 User Guide for more information
7
LCD_D03
6
LCD_D02
5
LCD_D01
4
LCD_D00
3
LCD_RS
2
LCD_DEBUG
1
GPIO_6
Input signal for User information. Connected to gpio0_24
SW1:
PIN
SIGNAL
REMARK
1
SW2_1
Connected to RS485/RS232#. (Default OFF=RS232)
2
SW2_2
Connected to Half_Duplex/Full_Duplex#. (Default OFF = Full-Duplex)
3
3,3VDC
VCC_OUT (J6/J16). ON = 3,3VDC
4
5VDC
VCC_OUT (J6/J16). ON = 5VDC
5
USB_0_ID
USB OTG Identification. (OFF=OTG, ON=Only Host)
6
-
7
-
8
-