BULLDOG 65 Hydraulic Steelworker
1
1
1
1
1
SAFETY NOTES FOR MUB
SAFETY NOTES FOR MUB
SAFETY NOTES FOR MUB
SAFETY NOTES FOR MUBEA SYSTEME STEELWORK
EA SYSTEME STEELWORK
EA SYSTEME STEELWORK
EA SYSTEME STEELWORKERS
ERS
ERS
ERS
In this manual particular references are made regarding aspects of safety and the notes below
are intended as a summary to highlight the main areas for your attention.
The machine should be positioned so that the operator has sufficient room to work having
regard for the long lengths of material which may be punched or cropped. Electrical supply
should be by overhead cable to avoid possible damage.
It should be considered if additional equipment will be required to safely handle long or heavy
items being processed.
Any person who will use the machine should be given adequate instruction on the operation
and safety aspects of the machine. Extra copies of this manual are available from the
manufacturer.
In addition it should be established which persons shall be responsible for the changing and
setting of tools and blades and these persons given a more detailed instruction.
Mubea Systeme machines are supplied complete with various guards and barriers as standard
equipment which provide a generally accepted level of guarding when the machine is used for
the purpose for which it was designed.
1.
The main areas of deviation from design criteria would probably be:
2.
The use of materials other than mild steel (65.000lbs.)
3.
The incorrect use of material hold-downs
4.
The punching, cropping or notching of small items
(as this would encourage the operator place fingers or hands into danger area).
If at any time additional tooling or equipment is fitted to the machine the question of adequate
guarding must be reviewed and the advice of the manufacturer sought if necessary.
All maintenance should be carried out by suitably qualified personnel and particular attention
must be paid to the correct setting and alignment of punches and dies, blades and other tools.
