9
INSTALLATION
REFER TO THE ‘INSTALLATION INSTRUCTIONS’ BOOKLET INCLUDED WITH YOUR
APPLIANCE FOR COMPLETE INFORMATION ON INSTALLING YOUR APPLIANCE.
IMPORTANT:
The installation of the pipes and electrical components of this appli-
ance should be carried out by a service professional.
WARNING: ELECTRICAL SHOCK HAZARD
Disconnect electrical power before installing the dishwasher.
Failure to do so can result in electrical shock or possible death.
DISHWASHER SETUP
Before using your dishwasher for the first time:
A) Adjust the Water softener
B) Add the salt into the Water softener
C) Fill the Rinse aid dispenser
D) Fill the Detergent dispenser
A) WATER SOFTENER:
The water softener is designed to remove minerals and salts from the water, which
would have a detrimental or adverse effect on the operation of the appliance. The
higher the content of these minerals and salts, the harder the water is. The softener
should be adjusted according to the hardness of the water in your area. Your local
Water Authority can advise you on the hardness of the water in your area.
WATER SOFTENER
The hardness of the water varies from place to place. If hard water is used in
the dishwasher, deposits will form on the dishes and utensils.
The appliance is equipped with a special softener that uses salts specifically
designed to eliminate lime and minerals from the water.