8
Troubleshooting
HG-6 FLUSHING SYSTEM
TROUBLESHOOTING THE PROGRAMMER
Battery Replacement
It is recommended that batteries
be changed every six (6) months
or when the low battery icon
appears (see Programming for
battery type).
If the LCD is not working, the
battery could be expired. If
the flashing battery symbol
appears, the battery power is
low. Replace the old battery
with a new battery.
If you need further assistance,
please contact us at
1.800.423.1323.
PROBLEM CAUSE
SOLUTION
Controller does not flush
as desired
Water at main water supply is
shut off
Battery dead
Replace battery
Battery dead
Replace battery
Controller improperly programmed
Check program and clock settings
Controller set to OFF
Set controller to desired program
Blank display
Water does not turn off
Overlapping programming
Review all programming and edit
any program that is in conflict with
desired off schedule
Clear all programming in memory
and reset
Programmer not communicating
Check Programming
Run Manual On / Off with solenoid
removed from valve (hold finger
or object over solenoid plunger to
prevent plunger from dislodging
from solenoid body)
Check wiring for damage and
connectors to ensure proper
connection (red to red & black
to black)
Check main supply valve
Summary of Contents for Hydro-Guard HG-6
Page 11: ...11 Notes HG 6 FLUSHING SYSTEM...
