M
UGNAI N I
®
MUGNAINI SERIES
GAS FIRED OVEN MANUAL
Mugnaini Imports, Inc.
11 Hangar Way, Watsonville CA 95076
888.887.7206 │ 831.761.7167 │ Fax: 831.728.5570
www.mugnaini.com │ mugnaini@mugnaini.com
PAGE 5
2. UNLOADING, MOVING AND SETTING THE OVEN
2.1 UNLOADING THE OVEN: FORKLIFT REQUIRED!
The oven is shipped bolted to a sturdy pallet with open slat walls on all sides to allow for visual inspection.
Remove the crated oven from the truck using the appropriate forklift (see Receiving the Oven). Be sure
the forks are long enough to reach the rear supporting members of the crate.
IF THE FORKS ARE NOT LONG ENOUGH TO SUPPORT THE ENTIRE CRATE DO NOT ATTEMPT TO MOVE
THE OVEN - IT WILL TIP OVER. OBTAIN ANOTHER FORKLIFT OR USE FORK EXTENSIONS.
Once the oven is lifted from the truck immediately lower it to the ground, do not attempt to move the
oven while crated. Remove the plastic wrap and inspect the oven. Note any damage to the crate, oven or
accessories.
DO NOT SIGN THE DELIVERY BILL UNTIL THE OVEN HAS BEEN INSPECTED AND ANY DAMAGE
NOTED ON THE DELIVERY BILL. CALL OUR OFFICE IMMEDIATELY IF THERE ARE ANY SIGNS OF
DAMAGE: 888.887.7206.
2.2 OPENING THE CRATE
The oven crate is wrapped in plastic and metal banding. Parts and any accessories will be strapped to the
base and sides of the crate. The wooden slats that form the walls and roof are attached with screws, nails
and staples. The oven feet are lag bolted to the pallet base. Remove all strapping, parts and accessories
and disassemble the crate. Remove the lag bolts. The oven is now ready to be moved.
2.3 TOOLS REQUIRED
• Diagonal cutters and razor knife
• Hammer and pry bar
• Screw gun and bits
• Socket set
WARNING
ONLY PROPER HEAVY LIFTING MACHINERY AND HEAVY LIFTING EQUIPMENT SHOULD BE USED
FOR UNLOADING, MOVING AND INSTALLING THE OVEN. THIS DUTY SHOULD BE PERFORMED BY
PROFESSIONALS TRAINED IN THIS KIND OF WORK. IMPROPER HANDLING OF THE EQUIPMENT
COULD RESULT IN DAMAGING THE OVEN OR PERSONAL INJURY AND EVEN DEATH.