18
Listening to the Radio
1
Press the Mode button (MODE).
The source changes to FM.
FM 87.5
<
The FM button (FM) on the remote control unit
can also be used.
<
When a CD is not inserted into the unit, pulling
the DC power cable will also perform the same
operation.
2
Select the station you want to
listen to.
Automatic selection
FM 87.5
Hold the skip button (
.
/
/
) for more than
2 seconds and release it when the frequency
display starts changing continuously.
A station is tuned in automatically, and the
frequency display will stop. Repeat this step until
the station you want to listen to is found.
<
To stop the automatic tuning process, press the
skip button (
.
/
/
) briefly.
Manual selection
To tune in to a station the unit cannot tune in to
automatically, press the skip button (
.
/
/
)
repeatedly to select the station you want to
listen to.
FM 87.5
<
Press the skip button (
.
/
/
) briefly. The
frequency changes by a fixed step (0.1MHz). Press
repeatedly until the station you want to listen to
is tuned in.
<
You can also use the skip buttons (
.
/
/
) on
the remote control.
3
Press the volume buttons (−,+) to
adjust the volume.
VOL 05
<
The volume can be adjusted in a range between
00 and 32. (“MAX” is shown on the display at 32.)
The frequency
is shown af ter
"FM" is shown.
The volume level
is shown.
Hold down
