60
61
Hub Gear
The very high-quality Shimano Alfine
8-speed or 11-speed hub gears are in-
stalled on the muli. The currently shif-
ted gear can be read from the display
on the gearshift. The highest digit me-
ans the highest gear.
When shifting gears, be sure to pause pedaling briefly or at least
reduce pedal pressure.
To adjust the gears on the muli, shift
to fourth gear on the Alfine 8 and sixth
gear on the Alfine 11. At the rear of the
hub you can see two yellow markings
under a small plastic window.
These two markings can be moved
against each other and should be
exactly at the same height in fourth
gear and sixth gear respectively. If
they are not on top of each other in
fourth gear or sixth gear, you can ad-
just the cable tension at the adjustment screw at the front of the shift lever. You can
see from the two yellow markings in which direction you have to turn the adjusting
screw. Turn so that the two approach each other and do not move further away from
each other. Stop turning when the two yellow marks are at the same height again.
For more information on this topic, refer to the component manufacturer‘s system
instructions:
https://bike.shimano.com/de-DE/product/component/alfine-s7000s700.html
Summary of Contents for Muskel
