tint-STARTER SET
38
INSTRUCTION MANUAL
14
Reset button
15
Battery compartment
for 2 batteries LR03 (AAA)
Setup
Fitting the bulbs
You can insert the two supplied bulbs into different fittings, e.g. into a ceiling light and a
free-standing lamp or a desk lamp. The only requirement is that the lights each have a
suitable E27 socket.
1. Switch lamps off and unplug them from the mains (where
applicable) and/or switch off the fuse for the room at the
fuse box.
2. Allow previously inserted bulbs to cool when necessary.
3. Remove the old bulbs and screw the new bulbs into the
sockets.
4. Plug the lamp back in at the mains and/or switch the house
fuse back on and set the switch to I or ON.