tint-STARTER SET
INSTRUCTION MANUAL
41
Basic functions
Switching on/off
Press the standby button to switch the bulbs on and off again. The memory function will
store the last “illumination state” and will start again automatically the next time
the bulb is switched on.
Set colours
Press to select the desired colour:
Short press: The colour will switch in the desired direction on
the colour scale.
Long press: The colour will jump to a permanently stored
colour value.
Set white tone
Short-press to select permanently stored white tone settings: warm
white, neutral white and cold white.
Long-press to set the desired white tone from a continuous scale that reaches the super-
warm white range.
Set brightness
Short-press to select permanently stored brightness levels:
100%, 80%, 50%, 20%, 10% and 5%.
Long-press to set the desired brightness on a continuous scale.