background image

3

2

Messes come in all shapes and sizes, and the Mullet M5 Dust 

Cyclone Collection helps dispose of virtually all of them. But that 

doesn’t mean you should use it in all situations. 

Be sure to read and follow all safety instructions below and that of 

your vacuum before getting started.

- Don’t vacuum anything that is hot, burning or smoking, such as 

cigarettes, matches or hot ashes.

- Never vacuum explosive liquids (e.g., gasoline, paint thinner, etc.), 

acids or solvents, or operate in areas where flammable or explosive 

liquids are present.

- Don’t vacuum combustible explosive materials, such as coal, grain, 

or other finely divided combustible material.

- To avoid spontaneous combustion, empty dump bin after each use.

- Don’t vacuum hazardous, toxic or carcinogenic materials, such as 

asbestos or pesticides.

- Observe all warnings and safety instructions from your vacuum, 

including disconnecting the power source before servicing your M5 

and wearing proper safety equipment while operating.

We’re dedicated to making quality tools that perform day in and day out. 

But sometimes the unexpected happens. So, if there’s an issue with your 

Mullet Tools product, we provide the below warranty.

LIMITED WARRANTY

The Mullet M5 Dust Cyclone Collection is warrantied against defects in 

materials and workmanship for 1 year after the original date of purchase 

from a Mullet Tools authorized dealer and only applies to non-commercial 

use by the original owner. Structural alterations and use inconsistent 

with that outlined in this owners manual would not be covered under this 

warranty. Additionally, normal wear and tear is not warrantied. 

The Mullet M5 Dust Cyclone Collection must be returned directly to 

Mullet Tools. For details, reach out to gus@mulletools.com. Mullet Tools 

will repair or replace, at our discretion, the defective product or part.

There are no express warranties other than the warranty set forth herein. 

ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF 

MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, ARE 

LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY. Some States 

do not allow limitations on how long an implied warranty lasts, so the 

above limitation may not apply to you.

UNDER NO CIRCUMSTANCES, WHETHER FOR BREACH OF WARRANTY, 

BREACH OF CONTRACT, NEGLIGENCE, OR OTHER TORT, OR ANY 

STRICT LIABILITY THEORY, WILL MULLET TOOLS BE LIABLE FOR ANY 

INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some States do not allow 

the exclusion or limitation of incidental or consequential damages, so the 

above limitation or exclusion may not apply to you. This warranty gives 

you specific legal rights, and you may also have other rights which vary 

from state to state. The warranty is only available in the United States. 

No Mullet Tools reseller, agent, or employee is authorized to make any 

modification, extension, or addition to this warranty. 

warning

                                                         

warranty                                                 

READ MANUAL

BEFORE USING

Summary of Contents for Dust Cyclone M5

























Reviews: