9
8
Use included 14mm flat wrench
to tighten caster wheels to base.
DO NOT OVERTIGHTEN.
Align clear lid with markings
on neck of dump bin. Rotating
lid 90 degrees secures it in
place for the bumpiest rides.
1. Make it Mobile
2. install lid
put it together
Insert smaller end of either hose
adapter into vac inlet and MAKE
SURE IT IS FULLY SEATED. Twist
and push as needed.
Lightly tap with a rubber mallet,
if necessary.
If hose adapter remains loose
or doesn’t fully seat, see
Troubleshooting Tip 1.
Fully insert tee into hose
adapter.
ENSURE ARROW ON TEE IS
POINTING UP.
Tighten hose adapter thumb
screw onto tee.
DO NOT OVERTIGHTEN.
3. prep your vac
4. Tee it up
Optional: Secure hose adapter to vac inlet
with included self-drilling screw for a more
permanent connection. Hand tighten with
a Phillips screwdriver to ensure you don’t
strip the plastic.
Optional
Tee Up
