SPECIFICATIONS
12
Conduit
®
Hardware Guide
Backpanel Connectors
Label
Description
CELL, AUX
Cellular antenna inputs.
H5: CELL - Primary.
AUX - Diversity.
AP1, AP2
Slots for MultiTech accessory cards. You can install an accessory card in either slot. Both slots
can be occupied at one time. An exception is an SDIO (Secure Digital Input/Output) card,
which can be used only in the AP1 slot.
USB DEVICE
User-defined, high-speed 480 Mbps, standard USB 2.0 Micro B connector. Use this port to
connect the Conduit to a computer or another device. By default, this port is a serial port
terminal interface, but you can program it to act as another device such as a mass storage
device or an Ethernet port.
E-NET
RJ-45 receptacle for standard Ethernet 10/100 Base-T.
Caution:
Ethernet ports and command ports are not designed to be connected to a public
telecommunication network or used outside the building or campus.
USB HOST
High-speed, standard USB 2.0 Type A connector. 500mA maximum current draw. You can
plug into the Host port a device such as a flash drive, camera, or printer if the Linux kernel
has the appropriate driver.
Power
9-32 Vdc power receptacle for provided power cord.
