31
3 - Comprehensive Driver Notes
Getting Started
For Novell, Lan Manager, and Packet Driver, first
insert the MT3410ZLX PC Card into an open
PCMCIA card slot, and remove all other PC Cards
from your computer. Insert the MT3410ZLX driver
disk into Drive A and type A:\INSTALL at the
command prompt. The installation program will
copy files to the destination directory and modify
your related files (CONFIG.SYS, AUTOEXEC.BAT,
and NET.CFG).
For Windows for Workgroup, Windows NT and
Windows 95, use the
“Network Setup” utility
provided by Windows system to install the
MT3410ZLX. On this disk you will find sub-
directories for each of the Microsoft products. Each
directory has a README.TXT that will help install
that particular Microsoft product.
After installation, reboot your computer to enable
the MT3410ZLX.
Using DOS Extended Memory Managers
Under PCMCIA, all I/O cards (including Ethernet
and Modems) must be initialized as memory cards
and then switched into I/O mode operation by an
enabler software.
Therefore, the enabler software (e.g.,
CARDEN.EXE) must see the PC Card memory
when it is executed. DOS extended memory
managers such as EMM386 and QEMM take control
of the PC memory space which effects PC Card
initialization.
