2
INSTALLATION & OPERATING
MANUAL
FSFCA Universal Mount Fan Coil
12,000-60,000 BTUH
GENERAL
Read the entire contents of this manual
before beginning installation. Multiaqua
assumes no responsibility for equipment
installed contradictory to any code
requirement or installation instructions.
The components of this fan coil have
been inspected at the factory and readied
for shipment. Upon receiving the
shipment a visual inspection of the
packaging must be performed.
If any damage to the packaging is
discovered, an inspection of the
components must be performed and
noted on the delivery documents. If
component damage is found a damage
claim must be filed by the receiving party
against the delivery party immediately.
This product is designed and
manufactured to permit installation in
accordance with national codes. It is the
installer’s responsibility to install the
product in accordance with national
codes and/or prevailing local codes and
regulations.
Care must be taken to ensure the
structural integrity of the supporting
members, clearances and provisions for
servicing, power supply, coil connections
and/or condensate removal. Before the
installation ensure the structural strength
of the supporting members is sufficient.
See
Figure 1
for hanging weights of the
fan coils.
This unit is designed to be installed in a
-------------------------------------- CAUTION --------------------------------------
Care must be taken when handling sheet metal. Sheet metal parts have sharp edges and could
cause injury.
horizontal or vertical configuration. Fan coil
can be mounted on a wall or ceiling. See
Figure 2
for fan coil and mounting bracket
dimensions.
FAN COIL
APPROXIMATED
MODEL NUMBER
WEIGHTS (lbs.)
FSFCA-04-1-U
88.00
FSFCA-06-1-U
90.20
FSFCA-08-1-U
96.80
FSFCA-12-1-U
143.00
FSFCA-16-1-U
154.00
FSFCA-20-1-U
256.20
Figure 1
