background image

www.multibrackets.com

M Public Video Wall Mount Push HD

INSTALLATION AND USER MANUAL

Warning

For correct and safe use 

This manual contains instructions and drawings for correct 

and safe use of the product. Non-compliance with des-

criptions and drawings and/or improper use of the product 

could cause the effects specified below. Please note the 

following hazard symbols before reading the remainder of 

this session, and follow the instructions thoroughly.

 

Danger:

 any failure in observing these instructions could 

lead to death or serious injuries.

 

Warning:

 any failure in observing these instructions 

could lead to failure or damage to objects.

Meaning of the symbol:   the symbol

 

warns against doing 

something.

Special precautions for safety. 

 Danger 

-  Follow the instructions reported in this manual about the 

installation method. Any failure in observing these instruc-

tions could lead to damage or injuries due to MONITOR 

set or other objects falling down. 

- Please use qualified personnel for installation  

-  Make sure that the wall where the MONITOR set has to 

be installed can bear the weight of the MONITOR set 

itself. 

-  Do not apply any other weight to the MONITOR set or the 

bracket. This could make the MONITOR set fall down and 

cause injuries or damage to objects. 

- Do not change or alter the components for installation. 

This make the MONITOR set fall down and cause injuries 

or damage to objects. 

 

Warning

 

Carry out the installation in places without humidity or dust.     

 -  Do not install the MONITOR screen in places with a 

high degree of humidity and dust. This could bring 

about fire or electric shocks.     

 -  Do not install the MONITOR screen in places where it 

could get in contact with fumes or vapours. This could 

bring about fire or electric shocks. ¨

Carry out the installation in a well vented area.  

 -  Do not obstruct the holes for air passage on the MO-

NITOR screen. This could bring about fire.  

 -  Do not place the MONITOR set in a poorly vented 

place. 

Please take careful note of the following:

 use qualified 

personnel for the installation. The producer will not bear 

responsibility for any improper installation or any accident, 

damage or injury that may come arise from incorrect instal-

lation.

Videowall with quick lock push system 

Summary of Contents for M Public Video Wall Mount Push HD









Reviews: