05
Place the supplied IR receiver in such a way that it is visible for your infrared remote
control and if possible not in the vicinity of potential sources of disturbance like direct
sun light, TL lighting, energy saving lamps etc. The infrared LED.
Mount the IR Module in an accessible place behind or alongside You're A/V equip-
ment, in the vicinity of a socket (100-240Volt 50/60Hz). Make sure you take the cable
length of the Cable into account and try to ensure that the connections remain as
accessible as possible.
Now connect the IR Receiver to the IR Module, check the correct position and the
colours of the wires when doing so.
2. IR receiver:
3Pin 3.5mm jack IR IN
1
GND (RING)
+12VDC (SLEEVE)
IR SIGNAL (TIP)
STATUS
GND (RING)
+12VDC (SLEEVE)
IR SIGNAL (TIP)
4Pin 3.5mm jack IR IN
2
3. IR EMITTER:
3.5mm jack outputs for connecting an IR Extender Cable with
4. ATTACHMENT HOLES
(mounting material not supplied) .
1 or 2 LEDs.
IR
RECEIVER
IR
MODULE
IR
LED
IR status LED
IR RECEIVER
IR EMI
TTER
DC POWER LED
DC 12V
USB POWER LED
USB 12V
2
3
1
2
3
1
5
6
4
A. MAIN ROOM APPLICATION
1.
2.
