14
IHL_UDARA_2016_11_04_BEGB
4.2.2
C52 two-pipe system
As an alternative to open
fl
ue gas outlet system B22p,
you can also use closed system C52.
The drawing below shows a two-pipe C52 system.
The length of the
fl
ue gas outlet (L1+L2+L3) plus the
equivalent length of the bends must not exceed the
maximum value speci
fi
ed in item 4.2.7.
Always install a measuring point in the CAS and FGO.
L1
L2
L3
1
Legend
Number
Meaning
1
Measuring point
4.2.3
Parallel systems (C12/C32)
You can use a parallel system to discharge the
fl
ue
gases. Multicalor carries a range of supply and
discharge pipes made of high-quality PP and stainless
steel.
The drawing below shows a parallel system.
The length of the
fl
ue gas outlet plus the equivalent
length of the bends must not exceed the maximum
value speci
fi
ed in item 4.2.7.
Always install a measuring point in the CAS and FGO.
L
L1
L2
1
Legend
Number
Meaning
1
Measuring point