Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany
Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11
info@multichannelsystems.com
www.multichannelsystems.com
© 2014 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
W2100-HS32 Headstage
Pin Layout of the 32-Channel Headstage for the Wireless2100-System
multi
channel
systems
*
W2100-HS32 bottom side: Connector for the
electrode probe or the ME/W-Signal generator.
Connector for W2100-HS32
This Omnetics connector
A79023-001
mates with Omnetics connectors with
4 guide posts, such as:
Straight Thru-Hole:
A79022-001
Horizontal Surface Mount:
A79024-001
Vertical Surface Mount:
A79026-001
Cable (18.0" 34 AWG lead-wire):
A79028-001
W2100-HS32 with Omnetics connector
A79023-001 (NSD-36-DD-GS
female, 4 guide posts)
Diagram of the bottom side with pin layout.
GND E1 E3 E5 E7 E9 E11 E13
REF E2 E4 E6 E8 E10 E12 E14 E16 E18
E20 E22 E24 E26 E28 E30 E32 GND
E15 E17 E19 E21 E23 E25 E27 E29 E31 GND
Please orientate the headstage
as shown on the diagram.
Pin Layout
of the
Omnetics connector A79023-001
Guide
posts
GND
Ground
REF
Reference
E1 to E32
Electrode 1 to Electrode 32 = MC_Rack Channel 1 to Channel 32
W2100-HS32 top side:
Please use the connector in the lower
right (storage battery) for orientation
of the headstage.
Storage battery
connector on the
opposite side
for orientation.
Summary of Contents for Wireless2100-System
Page 1: ...Wireless2100 System Manual ...
Page 33: ...Datasheets ...