Each headstage has a battery connector and two LEDs, blue and red. The headstages are coated with
transparent blue material as protection against water and dirt. The standard
gain of the headstages
is 100
, and the frequency range is
1 Hz to 5 kHz
. A lower cut off frequency of 0.1 Hz is available on
request.
Sampling Rate
The Wireless2100-System can sample the maximum of 32 channels with
10 kHz
per channel. Depending
on the number of selected channels, the sampling rate can be increased even more. If multiple headstages
are operated simultaneously with a single receiver, the sampling rate is limited to
2 kHz
per channel. For
details please see chapter "Technical Specifications" in the Appendix.
Summary of Sampling Rates per Channel for the four Headstage Types:
W2100-HS4:
25
kHz per channel simultaneously on all 4 channels, also 40 kHz when using
2 channels.
W2100-HS8: 25 kHz per channel simultaneously on all 8 channels, 40 kHz when using
4 or 2 channels.
W2100-HS16: 25 kHz per channel simultaneously on all 16 channels, also 25 kHz when using
8 channels and 40 kHz when using 4 or 2 channels.
W2100-HS32: 10 kHz per channel simultaneously on all 32 channels, 25 kHz when using
16 or 8 channels, 40 kHz when using 4 or 2 channels.
Battery Options
Batteries of the Wireless2100 are always external, not built in the headstage. Standard batteries are
available with different capacities, 30, 100, 200 and 300 mAh. Custom batteries are available on request.
They can either be connected directly on the headstage with a double plug or with a cable connection,
for example, with a backpack on the back of the animal. Backpacks for rat and mice are available as
accessories. Please see the images below.
Summary of Contents for Wireless2100-System
Page 1: ...Wireless2100 System Manual ...
Page 33: ...Datasheets ...
