background image

                        

MUL-1.2M-KU Satellite Dish Manual 

 

www.multicominc.com

 

    All Rights Reserved © 2017 Multicom, Inc. 

   (800) 423-2594 

 

                                                                                                                      (407) 331-7779 

14 

 

2.7  Additional Installation Items 

 
Electrically ground the antenna-mast-mount assembly per the US National Electric Code (NEC) 
standards.  This material is not provided. 
 
In high wind prone areas, the assembly should be tethered to other structurally sound members on the 
structure to prevent sliding/flying in any direction.  These materials are not provided. 
 

3. Maintenance 

 

3.1  Inspection 

 

It is recommended that the installation be inspected every 6 months or more and after every severe 
weather storm. 
 
Check for: 
 

  Loose bolts 

  Loose mounts/clamps 

  Corrosion 

  Damage to dish, mount, brackets 

  Loose/damaged tethers 

  Movement of the dish and/or LNBF and/or mount 

  Roof damage, leaks 

  Loose ground connections 

 
Resolve all issues immediately to insure the highest performance and safety. 
 

   

4.  After-Sales Service

 

1.

 

If the equipment malfunctions, immediately contact your local in-country dealer or distributor or directly 
call our Multicom USA Technical Support Hotline 407-331-7779. 

2.

 

The onsite installation, maintenance, and operation of equipment must be performed by trained personnel 

 

5.  Disclaimer 

Multicom reserves the right to change any products described herein at any time, and without prior notice. 
Multicom assumes no responsibility or liability arising from the use of the products described herein, 
except as expressly agreed to in writing by Multicom, Inc.  The use and purchase of this product does not 
convey a license under any patent rights, copyrights, trademark rights, or any intellectual property rights.  
Nothing hereunder constitutes a representation or warranty that using any products in the manner described 
herein will not infringe any patents of third parties. 

Summary of Contents for MUL-1.2M-KU
















Reviews: