Page <3>
V1.0
04/03/20
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
Element14.com/multicomp-pro
3.6 No button pressed for 30 seconds = exit setup. Pressing CLOCK button can also exit setup.
3.7 Press and hold HOUR, MINUTE, TIMER button for more than 3 seconds to accelerate display update.
4. Random switching (Vacation mode)
4.1 Press RANDOM button, LCD will display RANDOM indicating the RANDOM switch is in effect between
6:00PM & 6:00AM. e.g. A connected light will switch on and off at random times indicating occupation.
4.2 Press RANDOM button again, then RANDOM disappear in LCD, so cancel random switch.
5. Manual Operation.
5.1 Press ON/AUTO/OFF button to choose switch mode in order of ON -> AUTO -> OFF.
5.2 AUTO: As per programmed commands. ON: power on status. OFF: power off status.
5.3 After finishing setting the timing commands select AUTO mode. The connected appliance will switch ON and OFF
according to the programmed commands.
Note:
Output will not operate until Timer Switch is plugged in to mains supply.
6. Review and/or modify or delete Switching Times
6.1 In AUTO mode press the TIMER button. The first switching time will be displayed. Repeated pressing of the TIMER
button will step through the switching program.
6.2 To modify a switching time follow 6.1 above until the switching time you want to change is displayed
6.3 Press the HOUR button to change the Hour, press the MINUTE button to change the minute
6.4 Press the WEEK button to change the day or group of days
6.5 Press the REC/CLR button to delete the displayed switching time.
6.6 Press the CLOCK button to exit programming and return to the running condition.
7. Specification
Accuracy: ± 1 minute/month
Battery: 1.2VDC NIMH battery
Max Switching capacity: 13A, 230VAC, 2900W.
8. Safe guide
8.1 For indoor domestic use only.
8.2 Please plug appliance in this timer outlet fully.
8.3 Keep this timer out of sight and reach of children.
8.4 Do not immerse this timer in water or other liquid.
8.5 Do not plug two or more Timers together in a row.
8.6 Connect appliance with correct loading specification.
8.7 Please keep this manual in safe place for future reference.
8.8 If faulty please return product to the vendor you purchased it from.
8.9 If screen is blank, please plug timer to mains power, then use pin to press RESET button.
8.10 Do not use Timer with high inrush current appliance that exceeds the Max Switching capacity.
e.g Motor.
8.11 Before cleaning this timer, please remove it from mains power, then wipe with a clean dry cloth.
